WATER CONNECT TEE 3/8X3/8X3/8
Plumb pak tee adapter, nominal size: 3/8 in, female x tube x tube connection, brass, rough brass
Fluidmaster B3H18 High-Flexible Water Heater Connector, 3/4 in MIP x FIP,
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Oatey Sure-Vent 39016 Air Admittance Valve NPT, PVC
The purpose of an air admittance valve is to provide a method of allowing air to enter the plumbing drainage system without the use of a vent extended to open air and to prevent sewer gases from escaping into a building. An air admittance valve is a one way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system. The device shall close by gravity and seal the vent terminal at zero differential pressure (no flow conditions) and under positive internal pressures.
Fernco P1056-075 Pipe Coupling, 3/4 in, 2-3/8 in L
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Ideal for any drain application that uses plastic, PVC, CPVC or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
Fluidmaster 1W60CU Dishwasher Connector, 3/8 in Compression, 1000 psi,
Fluidmaster dishwasher water supply connectors or water supply lines are built to last. The new kits also come with a hose fitting that works on all the new dishwashers.
ADPT 5/16HOSE X 1/4MPT #29-54
Adapter for connecting a hose to a male threaded connection of a different diameter
Hose barb on one end and male NPT threads on the other
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.